If a key symbol or CL is illuminated on the screen, service mode cannot be accessed. Disable the child lock first by holding the RPM and Finished In buttons together for 3 seconds.
Runs a abbreviated 5–10 minute cycle testing all components sequentially.
Press and hold the of the touch screen for about 7 seconds until "P:01" appears. bosch serie 6 service mode
Service Mode is a built-in firmware feature that bypasses standard program controls. Instead of running a wash or dry cycle, the appliance enters a state where sensors, heaters, pumps, motors, and valves can be activated individually. This helps pinpoint faulty parts without running a full cycle.
: Turn the program selector knob to the 0 or OFF position and wait 2 seconds. If a key symbol or CL is illuminated
After repairing the appliance, you must clear the fault memory, or the machine may refuse to run normal cycles. To clear the codes, press and hold the Start/Pause button for roughly 5 seconds until the display changes to --- , E:00 , or emits an audible beep. Part 3: Component Test Directory (The "P" Codes)
Once you retrieve error codes from service mode, here is what they typically mean: Press and hold the of the touch screen
| Step | Action | |------|--------| | 1 | Ensure the dishwasher is (no lights on the display). If necessary, press the On/Off button to turn it off, then wait 10 seconds. | | 2 | Press and hold the “Start” or “Start/Reset” button. Do not release it. | | 3 | While holding “Start,” turn the program selector knob (or press the program buttons) to position 1 (usually the top left program, e.g., “Intensive 70°C”). | | 4 | Without releasing “Start,” turn the knob to position 2 (next program clockwise). | | 5 | Still holding “Start,” turn the knob to position 3 . | | 6 | Turn the knob back to position 1 . | | 7 | Release the Start button. The digital display should now show “01” or a series of flashing LEDs indicating you are in Service Mode. |
: Shut the dryer door and rotate the dial from OFF to any standard position to wake up the mainboard.
: Press and hold down the Drying Target or Allergy Plus touch button.