Capoxxo Vocal Preset -

Apply a narrow cut between 250 Hz and 400 Hz to remove boxiness. Compression Strategy

Set to 1/4 note or 1/8 note , synced to the tempo of your project. Feedback: Around 30% to 40% so the echoes gently fade away.

: A short, metallic plate reverb coupled with a ping-pong delay that made the voice bounce between ears like a pinball.

Set the detector sidechain between 5 kHz and 8 kHz . capoxxo vocal preset

Use a high shelf to boost frequencies from 8kHz and up by about 3–5dB. This gives the vocals that expensive, breathable texture found on tracks like "perfect" or "life is a movie."

Unlike traditional pop, the Capoxxo style often avoids heavy reverb in favor of complex delay and stereo manipulation:

Aim for 2dB to 4dB of taming on the loudest spikes. Compressor 2: Smooth Leveling Apply a narrow cut between 250 Hz and

To achieve that signature Capoxxo "thin but present" lead, your signal chain should follow this specific order: Subtractive EQ:

Sidechain the delay to the main vocal so the echoes quiet down while you are singing and swell up during pauses. Bright Reverb Type: Choose a plate or large hall reverb algorithm.

Are you using or third-party suites like Waves, FabFilter, or Soundtoys ? What microphone are you currently recording with? : A short, metallic plate reverb coupled with

A vocal preset can only do so much heavy lifting. To make the preset sound authentic, your recording technique must match the style.

1176 Emulation (Waves CLA-76, Universal Audio), or a standard stock compressor. Settings: Attack: Very fast (around 0.1 ms to 1 ms ).

Keep the attack smooth and the release slow. Aim for another 2dB to 4dB of gain reduction . 6. De-Esser (Taming the Sibilance)

Filter out everything below 300Hz inside the reverb plugin. This prevents your reverb from making your low-end muddy. Recording Tips for the Perfect Underground Vocal