The console turns on automatically when you start pedaling or when you press the main button. It automatically powers off after a few minutes of inactivity to save battery life.
: For upright models, loosen the height adjuster knob, slide the seat post to the desired height (ensuring your leg has a slight bend at the bottom of the pedal stroke), and tighten the knob firmly.
Secure them using the provided carriage bolts and nuts, ensuring they are tightened firmly to prevent wobbling. : Identify the Right (R) and Left (L) pedals. Easy Cycle Yj 1033 Manual
Align the screw holes on the bars with the base frame of the machine.
Connect the tension cable from the upright post to the main frame. The console turns on automatically when you start
: Locate the distinct stamps on each pedal spindle. The right pedal is explicitly marked with an "R" and features traditional clockwise threading. The left pedal is explicitly marked with an "L" and features a counter-clockwise thread pattern to avoid loosening during operation.
Identify the right (R) and left (L) pedals. Screw the right pedal clockwise into the right crank arm, and the left pedal counter-clockwise into the left crank arm. Secure them using the provided carriage bolts and
, detailing crucial safety rules, setup steps, digital display settings, and essential maintenance practices. ⚠️ Important Safety Precautions
Friction or Magnetic (depending on production series) adjustable via a tension knob.
Align the pedal axle with the left crank arm. Thread it counter-clockwise (turn to the left) by hand, then tighten firmly with the wrench. Step 3: Set Up the Digital Monitor
Staying active while sitting at a desk, watching television, or undergoing physical rehabilitation is easier than ever with compact pedal exercisers. The Easy Cycle YJ-1033 (often listed as the Easy Cycle Electric Rehabilitation Pedal