Eppendorf 5402 Manual !new! Jun 2026

Clean the dust from the condenser coils. Ensure 30cm clearance around vents. Emergency Lid Release Procedure If power fails and you must retrieve crucial samples: Disconnect the main power plug.

use materials that are highly flammable, explosive, or chemically volatile inside this standard laboratory environment.

Remove the plug and pull the attached cord or insert a screwdriver into the release slot to manually disengage the latch. If you need help with a specific issue, please tell me: What is showing on the display? Is the centrifuge making any unusual sounds ? Are you trying to perform a specific maintenance task ?

operate the unit without the inner rotor lid securely fastened in place. eppendorf 5402 manual

18 or 24-place rotors for 1.5 mL / 2.0 mL microcentrifuge tubes

Do you have the or the digital button variant of the 5402? Share public link

: For older models, the Internet Archive ( www.archive.org ) might have manuals or documents related to the Eppendorf 5402. Clean the dust from the condenser coils

Allows the user to set the target run speed in RPM.

Pre-cools the rotor chamber rapidly before a run.

Once you have the manual, understanding its structure is critical. The official document is typically divided into 6 core sections. use materials that are highly flammable, explosive, or

Securely fasten the rotor lid before closing the main centrifuge lid. Running the centrifuge without the rotor lid can damage the instrument and cause aerosol contamination. 2. Setting Parameters and Running a Cycle

If the centrifuge malfunctions, check these common causes before contacting technical support. Potential Cause Recommended Action Main power disconnected or blown fuse.