For daily use, follow these standard steps for hood-type models like the FI-80: Preparation:
: Optimal washing occurs at approximately 150°F (66°C), with a final rinse at 190°F (88°C).
If you need help tracking down a specific diagram or part number for your machine, fagor fi80 dishwasher manual
The initial setup involves a few critical steps for safe and effective operation:
Due to the FI80's industrial nature, spare parts are specialised: For daily use, follow these standard steps for
Pull the drain plug (if gravity drain) or activate the drain cycle to empty the wash tank.
Connect to a hot water supply (ideally 50-60°C or 122-140°F) for faster heating and better results. The water pressure must be within 2-4 bar. The water pressure must be within 2-4 bar
: If the machine won't heat, you may need to check the manual reset thermostat located near the heating elements.
Scrape heavy food debris off plates and cookware before loading them into the rack. Slide the rack into the dishwasher. Lower the hood completely.
The machine must be installed on a level surface. The leveling legs allow for height adjustments to ensure stability, as detailed in the installation diagrams.
Water hardness must be below 4 grains per gallon (GPG). Hard water requires an external water softener to prevent scale buildup on heating elements. 2. Electrical Connection