Foxconn N15235 Motherboard Front Panel Connectors ((hot)) Site
The Foxconn N15235 motherboard front panel connectors Go to product viewer dialog for this item.
| Pin Number | Function | Description | Polarity (If applicable) | | :--- | :--- | :--- | :--- | | | Power LED (+) | Positive lead for Power LED | Positive (+) | | 2 | Power LED (-) | Negative lead for Power LED | Negative (-) | | 3 | Hard Drive LED | Hard Drive Activity LED | Positive (+) | | 4 | Hard Drive LED | Hard Drive Activity LED Ground | Negative (-) | | 5 | Power Switch | Power Button Input | N/A (Short to Ground) | | 6 | Power Switch | Power Button Ground | N/A | | 7 | Reset Switch | Reset Button Input | N/A | | 8 | KEY | No Pin (Blocked) | N/A | | 9 | Ground | Common Ground | Negative (-) | | 10 | No Connection | Reserved/Unused | N/A |
are labeled F_AUDIO and have a missing pin at position 8.
⚠️ : On many N15235 boards, Reset SW uses Pin 5 (GND) and Pin 7 (RESET+) . However, some OEM case cables have Reset SW as two separate wires: one to Pin 5, the other to Pin 7. If your Reset SW has two pins, plug them across Pin 5 and Pin 7 . If your case has separate “Reset GND” and “Reset +”, connect GND to Pin 5, Reset+ to Pin 7. foxconn n15235 motherboard front panel connectors
(Note: On some variations, Pin 9 is completely missing as a physical guide key, and Pin 10 is empty/NC). Pin-by-Pin Function Table Pin Number Signal Name Description Connected Component Hard Drive Activity LED (Positive) HDD LED Cable (Positive/Colored wire) Pin 3 Hard Drive Activity LED (Negative) HDD LED Cable (Negative/White or Black wire) Pin 5 Reset Switch (Ground/Negative) Reset Switch Cable Pin 7 Reset Switch (Signal/Positive) Reset Switch Cable Pin 9 No Connection (Empty space or blank pin) Pin 2 Power LED (Positive) Power LED Cable (Positive/Colored wire) Pin 4 Power LED (Negative) Power LED Cable (Negative/White or Black wire) Pin 6 Power Switch (Ground/Negative) Power Switch Cable Pin 8 Power Switch (Signal/Positive) Power Switch Cable Step-by-Step Cable Installation Guide
Using the pinout diagram above, align each cable with its corresponding pins. A visual guide of the connection would look like this:
Disclaimer: This paper is provided for informational purposes. Motherboard revisions may alter pinouts slightly. Always consult the silkscreen on the physical PCB if legible. The Foxconn N15235 motherboard front panel connectors Go
Here is a visual map of how the pins are standardly assigned:
Power LED (PWR_LED)
To hook up your case cables correctly, look at the small plastic connectors coming from the front of your PC case. They will be labeled with text like PWR SW , RESET SW , PLED , and H.D.D. LED . 1. Power Switch (PWR SW) Turns the computer on and off. However, some OEM case cables have Reset SW
: Often located on the bottom-left of the board near the audio chip For the complete technical layout, you can find the Foxconn G31MXP Manual or archived guides on Orange Hardwares Explaining PC Front Panel Connectors
If the PC boots up fine but the case lights stay dark, you likely reversed the polarity. Turn off the PC, pull the HDD LED or Power LED connector out, flip it 180 degrees, and plug it back in.