Ge Timer Switch 532641l3 Instruction Manual Pdf Pdf Install Fixed Access

Connects to the "Ground" (bare copper or green wire).

to fully charge and begin functioning once power is restored. Programming and Operation

If using low-wattage dimmable LEDs, verify they are compatible with basic digital switching circuits.

Locate the four required wire types inside the junction box: ge timer switch 532641l3 instruction manual pdf pdf install

Regular maintenance includes:

To set up the timer for the first time, use a small, non-metallic tool (like a toothpick) to press the

Connect the green or bare copper wire from the timer switch to the bare copper/green ground wire in your wall box. Secure with a wire nut. Connects to the "Ground" (bare copper or green wire)

: Use a toothpick or paperclip to press the "R" (Reset) button to clear previous settings. Set Time and Date :

Press the button to cycle through operational settings: ON : Keeps the connected light permanently powered. OFF : Keeps the connected light permanently unpowered. AUTO : Runs your programmed schedules automatically.

Press the or Set button again to save the time. If prompted, use the same arrows to set the day of the week. Programming On/Off Schedules Locate the four required wire types inside the

| Parameter | Rating | |-----------|--------| | Voltage | 120–277 VAC, 60 Hz | | Resistive load | 40 A (240 VAC) | | Tungsten / Ballast | 10 A @ 120 VAC | | Motor (HP) | 2 HP @ 120/240 VAC | | Timer mechanism | Synchronous motor (24-hour dial) | | Minimum ON/OFF time | 30 minutes (using two trippers) |

The (often listed as model 469637) is a versatile in-wall digital timer designed to automate lighting for security and energy savings. This model features SunSmart technology, which automatically adjusts to seasonal sunset and sunrise times, and includes a "Vacation Mode" to simulate a lived-in look while you are away. Installation Instructions

Here's a step-by-step guide to installing the GE Timer Switch 532641L3: