Gordak 952 User Manual Updated [top] Page

unplug the machine during this phase; it’s designed to prevent the internal plastic components from melting due to residual heat. Nozzle Tightness:

: Choose a nozzle (standard sizes: 3mm, 5mm, 7mm, 10mm) and securely attach it to the hot air gun tip.

Take note of the wiring positions. The element connects via four wires: two thick wires for the 220V heating coil, and two thin wires for the internal thermocouple sensor. gordak 952 user manual updated

Use a dedicated tip thermometer (such as a Hakko 191 or similar) to measure the actual temperature of the soldering tip or hot air stream.

Choose a nozzle matching the size of the component you are reworking. Secure it tightly onto the gun barrel using the retaining screw. unplug the machine during this phase; it’s designed

Gordak 952 User Manual: The Complete Updated Guide The Gordak 952 is a versatile 2-in-1 SMD rework station, combining a high-performance hot air gun and a precision soldering iron. Designed for delicate repairs on components like QFP, SOP, PLCC, and BGA, this station is a staple for electronics hobbyists and professional technicians alike. 1. Technical Specifications Overview

, meaning it is designed to prevent static discharge from damaging sensitive SMD (Surface Mount Device) components. gordakelec.com Quick Reference for Maintenance If you are looking for the latest maintenance tips from the Official Gordak Product Guide Heating Elements: The element connects via four wires: two thick

When you are finished, flip the hot air switch to "OFF." Do not unplug the machine immediately. The Gordak 952 features an automated cooling system. The heating element shuts down, but the pump continues blowing cold air until the internal element temperature drops below 100°C. Once safe, the air will shut off automatically. Unplugging the unit early will trap intense heat inside the wand, melting plastic housing components. 2. Using the Soldering Iron