DC 4–30V (Note: Exceeding 30V on the power input will damage the unit). Accuracy: Typically ±1%. Dimensions: Approximately 48mm x 29mm x 26mm. Wiring Guide The device usually comes with two wire harnesses: Thin Wire Harness (Power & Sensing): Red: Power supply positive (4–30V). Black: Power supply negative/ground.
Ensure the current shunt (thick red and black wires) is wired in series with the load, not parallel. The load must be connected to the ground side.
Configuration B: Isolated Power Supply Wiring (For targets over 30V)
Voltage measurement wire (connect to the positive of the source you want to measure). Thick Wire Harness (Current Measurement): Thick Red/Blue: Connect to the negative side of the load. hks-va028-v2.0
: Integration is easier than ever. The updated firmware (v2.0) ensures seamless communication with modern control systems, reducing setup time by nearly half. Increased Lifespan
Could you clarify if this is for a , industrial controller , or an automotive part ?
It seems you've provided a specific code or product identifier, "hks-va028-v2.0," without additional context. This could refer to a variety of things such as a product model, a software version, or a specific designation within a larger system. Given the lack of context, I'll create a generalized long essay that could potentially encompass what one might discuss regarding a topic associated with such an identifier. DC 4–30V (Note: Exceeding 30V on the power
Provides a low-cost visual upgrade for DIY or legacy analog variable power setups.
HKS-VA028-V2.0 - Woltomierz Amperomierz LED 99V/10A red/blue 12V 26x46mm. Wekton Electronics, sklep Łódź. WEKTON Electronics
This 2-pin or 3-pin low-gauge connector supplies power to run the internal microcontroller and the dual LED array. Wiring Guide The device usually comes with two
The is an aftermarket external wastegate actuator (often referred to as a "wastegate" or "gate") manufactured by HKS, one of Japan’s most venerable tuning houses. Its primary function is to regulate the boost pressure produced by a turbocharger. Unlike factory internal wastegates, which are often welded to the turbine housing, HKS’s external design allows for more precise, creep-free boost control.
By incorporating an onboard precision microcontroller and an internal low-resistance shunt, the HKS-VA028-V2.0 Go to product viewer dialog for this item.
: Providing a digital readout for custom-built DIY electronics power stations. or specific pinout instructions for this version?
: Typically ±1% for both voltage and current measurements. 3. Application Use Cases The versatility of the HKS-VA028-v2.0 makes it a staple in several sectors:
