Ldc101 Usb To Civ Driver Updated Jun 2026

I can provide specific baud rate and CI-V hex address settings for your station. Share public link

Guide to Updating LDC101 USB-to-CI-V Drivers for Icom Radios

Arthur’s shack was a sanctuary of flickering tubes and the warm hum of his classic Icom IC-735

: If a clone is detected, the official driver deliberately refuses to start, throwing a "Code 10" (This device cannot start) error in Device Manager. ldc101 usb to civ driver updated

Using an outdated driver for your LDC101 cable can cause several performance and safety issues on your PC:

Recent Windows updates can sometimes break communication with older USB-to-serial chips (like those used in the LDC101).

: Look for FTDI driver version 2.08.24 or older. I can provide specific baud rate and CI-V

The radio disconnects randomly from your logging software. "Port Busy" Errors: Software cannot open the COM port.

You should see your device listed, for example, "Prolific USB-to-Serial Comm Port (COMx)". Troubleshooting Common Issues

, some official Prolific drivers may intentionally disable "clone" chips with a "Code 10" error . Switching to a CH340-based cable usually avoids this issue. Are you having trouble with a specific Icom model or software like Ham Radio Deluxe : Look for FTDI driver version 2

Some older versions of these cables may use FTDI or Prolific chips. If the CH340 driver doesn't work, check the hardware ID in Device Manager to confirm the chip manufacturer. 2. Updated Installation Steps

Disable USB selective suspend in Windows power settings to prevent the LDC101 from sleeping.

By ensuring your is updated, you ensure that your Icom radio control remains stable, allowing for a better operating experience.