Lighthouse-tx-htc-2-0-calibration-rescue-244.bin
The lighthouse-tx-htc-2-0-calibration-rescue-244.bin is a vital tool for extending the lifecycle of SteamVR 2.0 tracking hardware. It represents the final software-tier intervention before a device is deemed a total hardware failure.
With the base station unplugged, connect it to your PC via a USB micro-B cable.
Lighthouse-tx-htc-2-0-calibration-rescue-244.bin: The Ultimate Guide to Fixing Your SteamVR Base Station lighthouse-tx-htc-2-0-calibration-rescue-244.bin
This file is used as the first part of a two-step manual recovery process. Only attempt this if your base station is already non-functional, as it carries a small risk of making the issue worse.
(The tool that attempts the fix).
Instead of the rescue file, copy the latest firmware file (e.g., lighthouse_tx_htc_2.0-436-2016-09-20.bin or newer) from the same folder into the drive. Power cycle the base station. Troubleshooting: When the Rescue Fails
: During an automated Bluetooth update via SteamVR, data corruption can cause the base station to lose its structural tracking geometry metadata. The lighthouse-tx-htc-2-0-calibration-rescue-244
After completing the updates, set the restored base station's mode to and ensure it is tracking properly while the other base station remains off. Once confirmed, set both base stations to "B" and "C" modes (or "A" and "B" for wired synchronization) and restart SteamVR. Everything should now function as normal.
the lighthouse_tx_htc_2_0-calibration-rescue-244.bin file from the SteamVR folder onto the "CRP_DISABLED" drive. Lighthouse-tx-htc-2-0-calibration-rescue-244
You might need to use this rescue file under the following circumstances:
