Motorola Gm338 Programming Software __exclusive__ Download Repack Link Jun 2026
Before you hit "download" on any link, make sure you have these two things sorted: The Cable:
To download the Motorola GM338 programming software, you can use the following repack link:
: Ensure you have the version matching your radio's region (e.g., AA for Asia, EMEA for Europe). motorola gm338 programming software download repack link
Immediately save an unaltered copy of this original archive file ( .cpg ) as a backup recovery image. Modifying Key Parameters
Tip: Opt for cables utilizing an rather than generic Prolific chips. FTDI drivers automatically install and remain stable across Windows 10 and 11 updates. The RIB (Radio Interface Box) vs. RIB-less Before you hit "download" on any link, make
The radio is available in different versions based on its frequency band, which is critical to identify before you begin programming. The most common models are in the VHF (136-174 MHz) and UHF (403-470 MHz or 450-527 MHz) ranges, but low-band models also exist.
Necessary (such as Prolific or FTDI drivers). FTDI drivers automatically install and remain stable across
Verify assignment in Device Manager; roll back Prolific drivers if necessary. Regional software mismatch.
The GM338’s software was designed for a bygone era of computing, which presents the primary challenge for modern users. The software is highly dependent on a proper serial port connection and specific drivers that modern Windows (10, 11) often doesn't support natively.
Plug the RJ45 end of the cable into the GM338 mic jack, plug the USB end into your PC, and power on the radio.