Nalco 73385 Msds Updated Page

The MSDS (now known as Safety Data Sheet or SDS) for Nalco 73385 provides critical information on the safe handling, use, storage, and disposal of the product. The SDS is designed to communicate health, safety, and environmental information to workers, emergency responders, and other stakeholders.

Flush the affected skin area immediately with plenty of running water while removing contaminated clothing. Wash the area thoroughly with soap and water.

NALCO 73385 is an effective industrial biocide, but its high alkalinity means it poses significant health and safety hazards. By reviewing the NALCO 73385 MSDS, using proper PPE, and following strict handling procedures, operators can maximize the effectiveness of their cooling water treatment while maintaining a safe work environment. nalco 73385 msds

The chemical, its mixtures, and contaminated rinse water must be treated as hazardous waste. Disposal must be carried out in compliance with local, state, and federal environmental laws (such as RCRA in the United States). Do not reuse empty containers; they retain chemical residues and must be triple-rinsed and punctured or sent to an authorized drum reconditioner. Summary Checklist for Compliance SDS Section Key Takeaway Core Requirement Hazard Identification DANGER: Corrosive, toxic if inhaled, causes severe burns. Section 4

: Under fire conditions, it may evolve toxic oxides of carbon ( COxcap C cap O sub x ) or phosphorus ( POxcap P cap O sub x The MSDS (now known as Safety Data Sheet

NALCO 73385 is a high-performance, non-oxidizing, broad-spectrum biocide specifically formulated for controlling microbiological growth in industrial water systems. As a specialized chemical product, adhering to the safety protocols outlined in the —now formally referred to as a Safety Data Sheet (SDS) —is essential for environmental compliance and personnel safety.

Corrosive. Can cause severe skin irritation, burns, and localized tissue damage upon direct contact. Prolonged exposure may trigger an allergic skin reaction (sensitization). Wash the area thoroughly with soap and water

Act as scale inhibitors by dispersing mineral ions.

Evacuate area immediately. Do not look directly at the spill. Deploy liquid nitrogen containment. Under no circumstances should the spill be allowed to reach a temperature of 20°C or higher.