77352 Sds ((hot)) | Nalco

If accidental exposure occurs, rapid action is necessary. Always consult a medical professional immediately after administering first aid.

NALCO® 77352 (also registered as NALCO® 77352NA) is primarily utilized to maintain optimal heat transfer efficiency and prevent microbial corrosion in industrial open-recirculating, closed-loop cooling towers, and air washers.

Used in open and closed-loop cooling systems, process water systems, and brewery pasteurizers. It is copper-free, making it safe for closed-loop systems.

The active constituent is a mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one . The European Chemical Agency (ECHA) sets the concentration of the active substance (CMIT/MIT 3:1 mixture) as ≤ 2.5% . nalco 77352 sds

Harmful if swallowed, inhaled, or absorbed directly through the skin. Environmental Hazards

Used or unused product is considered hazardous chemical waste. It must be disposed of in accordance with all local, regional, and national environmental regulations. Do not dispose of in household trash or pour down drains. Typically, the preferred disposal method is incineration at a licensed hazardous waste facility.

However, no industrial chemical should be handled without its authoritative safety document. This is where the —formerly known as the MSDS—becomes critical. If you are searching for the Nalco 77352 SDS , you are likely responsible for: complying with OSHA HazCom 2012 (or global GHS standards), writing a job safety analysis (JSA), training employees, or responding to a spill. If accidental exposure occurs, rapid action is necessary

Wash off immediately with soap and plenty of water. Remove contaminated clothing. If a rash occurs, seek medical advice. Inhalation: Move to fresh air. Treat symptomatically. Ingestion:

Hand a trainee a printed copy of the Nalco 77352 SDS. Ask them to find within 30 seconds: (1) What to do for eye contact, (2) The recommended glove material, and (3) If the product is flammable.

The SDS provides the following first aid recommendations: Used in open and closed-loop cooling systems, process

When you treat the SDS as a living operational guide rather than a paperweight, you protect your workers, your equipment, and your environmental compliance. And for Nalco 77352, that is the definition of doing the job right.

Here are some key physical and chemical properties of Nalco 77352:

In the event of exposure, the following measures are standard recommendations:

The Globally Harmonized System (GHS) classifies this product as highly hazardous, carrying a signal word on its labeling. Key Toxicity Classifications

To ensure safe handling and storage of Nalco 77352: