psdrgifflexpage.html heathkit hw-5400 information mic.html ddsboard.html naruto storm 4 pkg ps3 ant.html philco.html car.html propagation sixmeter.html

To search this page simply Hit CNTL F keys to open a find window, then type your search words
lang
Select your Language:
If you like my version of PowerSDR, and would like to Donate, you can do so via the Paypal link below:
naruto storm 4 pkg ps3

  or if you have a PayPal account, Click on the PayPal Me link: PayPal.Me/ke9ns

Naruto Storm 4 Pkg Ps3 ((new))

Naruto Storm 4 Pkg Ps3 ((new))

  • Maps of PowerSDR
  • Meters On Top, Band Stack on Right panel, Live MIC
  • Grayline, Sun, Moon, ISS, DX Spots appear as Red DOTS on World Map (CTRL key over DOT to set Freq, Filter, Mode, split)
  • 3D Panadapter Spectrum
  • DX & Memory Spots: Right Click over=QRZ page, CTRL key over= Set Freq, mode, split, filter
  • Panafall mode for 2 receivers with DX & Memory spots
  • NCDXF Beacon Scanner (Fast or Slow Scan options). Spotter->Time Sync button to auto adjust your PC Clock.
  • VOACAP propagation prediction contour mapping (or point mapping) based on space weather (shown in Lower left of console)
  • SWR Plotter Display (up to 5 runs per band and Antenna)
  • SWL Bands and SWL Stations by time of day (right click SWL to google search). And helps to identify carrier signals in the 40m band.
  • Transmit Your Callsign or graphic image into the Waterfall for other SDR's to see.
  • BandText, Space Weather (lower left), and local weather at your Lat and Long.
  • ID Timer with options for Voice ID, CW ID, Water ID, or Popup (on the 10's, or 10 min after you start)
  • Scanner functions including selective Memory Scanner, Band Scanner, and SWR Scanner.
  • Spotter Window: including Time Sync button (good for FT8 and Beacon Scanning), Antenna Pointing, Mapping, etc.
  • Searchable and Clickable SWR listings (from eibispace.de) with clickable shortcut names on the right side.
  • jquery carousel
  • Multiple Saved QuickAudio files (WAV and MP3 formats), Voice keyer options (including ID timer voice keyer), and contest buttons.
2 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
carousel jquery by WOWSlider.com v8.8

------------------------------------------------------------------------------------------------------------------------------------------------

manual
Click to open the current latest v2.8 PowerSDR ke9ns manual. Although specifically for the Flex-5000, most of it applies to the Flex-3000 and Flex-1500.
Latest revison date: Jan 11, 2026


Authorized Legacy Service
Troy Radio Service is the Authorized legacy service center for Flex Radio
(Flex-1500,Flex-3000, Flex-5000).
Webpage: http://www.troyradio.net
Email: N5SIM

Facebook Group:
Facebook group for legacy Flex radio discussions.


Manuals, Repair, Technical info, Folder locations, Turf/Mars

wi10

Click here for Manuals, Repair info, Technical info, Folder locations for Flex-1500, Flex-3000, Flex-5000

Compatible Windows versions (and Radio Firmware)

.NET 4.8.0

You may need to download and install .Net 4.8 if your running Win7SP1 or Win10

----------------------------------------------------------------------------------------------------------------

Win 7 issues

8/4/22: I belive do to "End of Support" for Win7, simply installing Win7 and manually downloading SP1 (service pack 1) and .NET 4.5.2 and .NET 4.8 is no longer enough to get PowerSDR to work. If you find "Windows Update" fails you will need to fix this so you can update many missing updates that came after the basic SP1 update.Try manually downloading KB3020369 and KB3172605. After installing these, you should now be able to use "windows Update", then keep checking for updates. Every time it requires a reboot, check for more updates (you may need to repeat this 7 or 8 times). You can also manually find and install KB3125574 and KB3177467

----------------------------------------------------------------------------------------------------------------

Runs on Windows 11

IMPORTANT: If your version of Win11 has CORE ISOLATION feature. You MUST disable Memory Integrity checking immediately.

----------------------------------------------------------------------------------------------------------------

Runs under: Win7 sp1, Win8, Win10, and Win11
 (You want a minimum 1440 x 900 screen resolution)

---------------------------------------------------------

Due to the age of Win7 and changes to the internet, you must now manually download a series of KB update to allow Win7 to connect to the internet and before you install PowerSDR

I suggest you install Win7 SP1 x64 Ultimate (download from the internet wayback machine)

On a PC that can connect to the internet, go to: https://catalog.update.microsoft.com/Home.aspx
Search, download and install the following to a USB thumb drive. You need to get updates based on if your installing x86 or x64 versions of Win7

1) KB976932 (SP1 for Win7, if you dont aleady have SP1)
2) KB3020369, KB3172605 (Servicing Stack)
3) KB3125574 (if Win7 x64)
4) KB4534314
5) KB3177467
6) KB4474419, KB4490628 SHA-2 support

You shoud now also be able to use the Windows 7 built in "Windows Update" again
to download/install the remaining updates (100's of them)
You only need to do this if are not upgrading further to Windows 10 or 11


After a PC reboot, go and download and install the .NET 4.5.2 that is also required for PowerSDR v2.8.
See: https://www.microsoft.com/en-us/download/confirmation.aspx?id=42642
Install and reboot your PC.
Now download PowerSDR ke9ns v2.8 (Orange button) and install.

________________________________________________________________________________


Firmware:
NOTE: If after you install v2.8 or v2.7.2, and PowerSDR does not find your Flex-5000, you must first check that your 1394 FireWire card is running (use Device manager).

If you have not used your Flex for many years (i.e. you have very old v1.x.x.x firmware), you may need to uninstall all PowerSDR and FlexRadio software.
Then Download, install, and run PowerSDR v1.18.6 here. If PowerSDR says you need to update the radios firmware, then download this firmware v1.3.0.8 and the Flex firewire driver v3.5.0.7171 here.
After you update the driver and install the firmware, now download the FULL v2.8 installer and run it.
Now you can uninstall the older v1.18.6

News (Updates)

News and Updates:

IMPORTANT: If your version of Win11 has CORE ISOLATION feature. You MUST disable Memory Integrity checking immediately to prevent PFN BSOD crashes.

05/09/2024: 8m Band (40-45mhz) will now operate on the Flex-1500,3000,5000 when in "Extended" mode for those countries that allow operation. Band Text has also been updated for the 8m band.

05/01/2024: 630m Band (472-479khz) operation when in "Extended" mode, on the Flex-5000 may or may not work due to a factory ECO in 2010 that installed a 160m BPF (notch filter) in place of the original 160m LPF (low pass filter). If this BPF is in place you will need to replace it, or modify it to extend the bandpass down below 630m.

08/17/22: USING VAC: Because of Sample Rate (SR) up & down conversion between the Radio itself and VAC1, its best if you use 48khz SR for VAC1 & 2. This is because its a perfect multiple of 192 and 96khz SR.

You must also set the SR for your Virtual audio cables to 2 channel 16bit 48khz (for both Playback and Recording VAC cables (see Windows->Control Panel->Sound).

Failure to do so, will most likely result in buffer lag, which will cause Digital mode PC programs (like WSJT-X, FLDIGI) to not work correctly. If you do notice a lag in VAC audio, check all your Sample Rates to make sure they are ALL set to 2 channel 16bit 48khz.

12/28/21: Just discovered that you can run AnyDesk on both your Remote Laptop and Radio PC (2 instances) at the same time to allow full 2-way bi-directional audio as well as desktop control for full PowerSDR remote operation. See "Remote Deskop" Link.


11/19/21: Discovered the Culture decimal point issue when using .NET 4.6 (or greater). Need to add IFormatProvider "CultureInfo.CurrentCulture.NumberFormat" check to every .ToString("fx" , ) and double.Parse( text, ) and float.Parse (text, ) statement for the entire PowerSDR project. Or figure out how to make a global condition.

11/16/21: Found an updated version of MMSSTV (slow-scan TV): https://hamsoft.ca/pages/mmsstv-yoniq.php
It has a dark interface so it looks similar to my PowerSDR ke9ns.
Installation is in Spanish, but when you run it, you can select: Opciones->Configurar MMSSTV->MISC->Fuentes->Ingles (Option->Setup MMSSTV->MISC->System Font->English)

11/14/21: Upgrade Compiler to VS2022 and .NET 4.5.2. Found that PowerSDR has an issue with Windows Regions that use the Comma as a decimal point when complied with .NET 4.7.2. Will continue to use .NET 4.5.2

10/23/21: Upgrade to Win11 Pro with no issues. Compiled PowerSDR under VS2019 + Win11

10/16/21: WINDOWS 11: Win11 and FireWire do work with PowerSDR. Win11 does require a more recent Computer board running a more Recent CPU (example: All AMD Ryzen based computer will be capable, but not Intel i7 older than 2019). Your Motherboard or Laptop will need a TPM 2.0 or 1.5 (Trusted Platform Module), which is a chip to store encrypted data keys that resides on your Motherboard, and a "Secure Boot" Capable setup. This requires you to go into your BIOS and turn on your TPM 2.0 module. But also your main Hard Drive needs to be GPT formated (not MBR) and both Win10 and your BIOS needs to be set to UEFI mode (not Legacy). If your hard drive is currently formated as a MBR, Microsoft did come out with a MBR2GPT program (i.e. admin dos: mbr2gpt /convert /disk:0 /allowfullos). To get a Free Win11 upgrade you need to have a fully updated and legal copy of Win10 and pass the hardware capability and valid CPU test in Win10 Update. You will need to google for the BIOS procedure for your motherboard Model# to activate TPM and UEFI (in both Win10 and BIOS). You do not need to activate Secure Boot in Win10 , just be capable of it).


10/15/20: Update FCCDAT.dat callsign file
New FCC website URL>>> ftp://wirelessftp.fcc.gov/pub/uls/complete/l_amat.zip
Update SWL.csv listings file.

9/2/20: Update shortwave listings, SWL.csv file (eibispace.de/) added to both .172 downloads

8/30/20: Update the latest "DReaM v2.2.1" decoder for Shortwave DRM digital audio transmissions.
Click Here to go DRM digital mode section of this webpage

Naruto Storm 4 Pkg Ps3 ((new))

These custom packages often utilize modified save parameters. Booting the game without loading a complete, pre-configured 100% unlocked game save can corrupt your existing save directories. Essential Requirements for Installation

: Official PS3 Naruto games were locked at 30 FPS; mods may struggle to maintain this during intense special moves.

officially bypassed the PlayStation 3, launching exclusively for eighth-generation consoles and PC. Despite this, a massive community demand persists for a PS3 PKG version of the game.

For fans of the beloved Naruto: Ultimate Ninja Storm series, the launch of Naruto Shippuden: Ultimate Ninja Storm 4 in 2016 was a major event. It was the epic, cinematic conclusion to the story of Naruto Uzumaki, and naturally, many players wondered if they could continue the journey on their trusty PlayStation 3. A quick search online for a "Naruto Storm 4 PKG PS3" might seem promising, but there are some essential things every player should understand before diving in. This article will clear up the confusion, explain the reality of Storm 4 on the PS3, explore legitimate alternatives, and help you navigate the world of PS3 game files safely.

While Storm 4 may not be available on the PS3, the console is home to some of the most beloved entries in the series. Instead of searching for a non-existent file, you should focus on enjoying the fantastic titles that were actually released for the system. The PS3 is a treasure trove for Naruto fans, featuring the first three mainline games:

To run any custom .pkg file on a PlayStation 3, the console cannot be running standard, official Sony firmware. It requires custom system modifications:

I can point you toward the correct, safe modding communities for your specific setup. Share public link

Let’s get straight to the point. The game was never officially developed, published, or released for the PS3. Official records from Wikipedia confirm that the game was released exclusively for PlayStation 4, Xbox One, and Microsoft Windows . Similarly, the expansion, Road to Boruto , was also released only for PlayStation 4, Xbox One, Nintendo Switch, and PC .

My YouTube Videos on all the features of PowerSDR KE9NS v2.8

Since the videos below are listed Newest First, If you are a first time user you will want to start with the oldest video first. Features in older videos are often superseded in newer videos.
youtube

51) Adding 1394 FireWire to a modern Laptop M.2 Slot.
50) Adding 1394 FireWire to a mini-PC M.2 Slot or mini-PCIe slot.
49) PowerSDR Spotter DX Cluster.
48) v2.8.0.289 Freq Scanner and SWR Scanner/Plotter.
47) v2.8.0.284 Pan Feature
46) v2.8.0.280 FM Data, Show/DX, Call search, VFOB TX Lock, TX Profile save, UpTime counter.
45) v2.8.0.274 Antenna naming, Remote Amp Bypass
44) v2.8.0.271 DX Spotter Improvments, DX Watch, CW macros, Manuals KeyCatShortCut button, RX2 Split.
43) v2.8.0.262 DX Spotter Improvements and Recap
42) v2.8.0 Audio Recording features and Recap
41) v2.8.0 PowerSDR Basic Initial Setup
40) v2.8.0 Live Map features of PowerSDR
39) v2.8.0.235 CAT, XVTR, Scanner, Spotter, RX2 Updates.
38) v2.8.0.213 (Addendum to my original SO2R video. This show full duplex operation. TX and RX at the same time)
37) v2.8.0.210 (2nd Receiver RX2 SO2R, running 2 instances of WSJT-X at the same time)
37) v2.8.0.209 (2nd Receiver RX2 SO2R features and Dual BandStack)
36) v2.8.0.194 (N1MM fixes,Scanner updates, Voice Keyers, Dial update, Click Grab and adjust features.)
35) v2.8.0.180 (Multiple CAT-COM ports, TCP/IP CAT)
34) v2.8.0.172 (Scanner update, Borderless console, 28band GEQ - 9band PEQ, SWR plot files, local weather for most locations around the world)
33) v2.8.0.154 FM Scanner, IIC data, 28band EQ, VAC/MIC audio mixer, 3D panafall, Analog Meters, Bandstack
33) v2.8.0.141 ESC,MUTE,ZOOM, AGC-T, Panadapter GRAB, TUNE STEP, I2C, Channels OFF/ON
32) v2.8.0.128
31) v2.8.0.114
30) Quick Split,XFC, full auto waterfall/panadapter leveling, DTMF tones, LoTW dup and dxcc checking v2.8.0.85
29) Panadapter color gradient Fill, PowerMate Alt Tune Step.
28) SWR Plots, SWL Search, PTT Hang timer, AM/SSB, Screen Shot, 8020PAN, BandText to Pan, Manual Rotor Control: v2.8.0.67
27) SWR Scanner / Plotter / Logger: v2.8.0.54
26) New Combo TX meter & Weather, and demonstrate setup of PowerSDR to run digital mode programs (like wsjt-x): v2.8.0.52
25) New VFO Font, Time-Out Timer, Enable VAC2, SSB-AM H3E mode,FM data mode, N1MM spectrum, UTC Recording start time: v2.8.0.43
24) More Improvements to ID Timer, Panadapter DX,Memory,SWL Spots, Moon, ISS, VFO Dials: v2.8.0.38
24) More Improvements to Scanner, Live MIC Meter, DX Spots, Time, SWL: v2.8.0.27
23) Improvements to the SCANNER and DX Spotting: v2.8.0.18
22) Improvements to TX WaterID (Waterfall images) (setup->transmit->wider): v2.8.0.16
21) Additional Sliders and Additional Meters: v2.8.0.12
20) QuickAudio buttons, ID timer features, FlexControl Alt TuneStep: v2.8.0.2
19) 10 minute Station ID Timer (popup, TX WaterID, audio or cw recording): Rev 122716T11
18) Larger VFO or Bolder, BandStack Panel with Add,Sort,DEL buttons, redesign space weather, Effective SunSpot #: Rev 121516T11
17) Color Rings, Pulser Tune, Mute just speaker, Drive Lock, BandStack Delete/Sort, VOACAP contour map, PAN Sliding VFO: Rev120316T11
16) VOACAP Propagation Map: Rev 111516T11
15) NIST Internet and WWV time signal decoder: Rev 110216T11
14) NCDXF Beacon scanner: Rev 101716T11
13) Antenna Rotor Control: Rev 101116T10
12) Beam Headings, MP3, SWL2: Rev 092916T10
11) Memory Audio recording Scheduler (weekly or monthly): Rev T10
10) SWL Searchable Listings panel: Rev T9
9) BandStack Panel with Locking feature: Rev T8
8) Space Weather, RX1 only mute, CWX CW key polling & updates: Rev T8
7) PowerMate Knob built in driver, BandStack features: Rev T8
6) Video links in "About" screen, 2nd Meter: Rev T7
5) DX Spotter URL List, Memories to Panadapter, Alt+M to add memory from Pan, Auto Water & Auto Pan adjust with bias sliders, : Rev T6
4) DX spotter by cw,digital,phone, Dx spots on map, special panafall tracking map :Rev S10
3) DX spotter age, parser for mode, split. Add Rx2 spotter, Record/Play ID :Rev S1
2) Dx Spotting,Memory Drag/Drop hyperlinking, multiple QuickAudio files in new Folder, add SWL bands, Bandstack index indicator, continuum mode, MON in AM/FM Rev: RevR3 to RevP3
1) Auto Water level button, grayfall, TX WaterID, skins, AvgP button, khz freq entry, Analog Meters,Peak reading, Waterfall Moves with Freq, Panafall for RX2, temp & volts: up to Rev P2

Below is a youtube iphone video showing how to install the ke9ns PowerSDR Rev T9 and higher
naruto storm 4 pkg ps3



These custom packages often utilize modified save parameters. Booting the game without loading a complete, pre-configured 100% unlocked game save can corrupt your existing save directories. Essential Requirements for Installation

: Official PS3 Naruto games were locked at 30 FPS; mods may struggle to maintain this during intense special moves.

officially bypassed the PlayStation 3, launching exclusively for eighth-generation consoles and PC. Despite this, a massive community demand persists for a PS3 PKG version of the game.

For fans of the beloved Naruto: Ultimate Ninja Storm series, the launch of Naruto Shippuden: Ultimate Ninja Storm 4 in 2016 was a major event. It was the epic, cinematic conclusion to the story of Naruto Uzumaki, and naturally, many players wondered if they could continue the journey on their trusty PlayStation 3. A quick search online for a "Naruto Storm 4 PKG PS3" might seem promising, but there are some essential things every player should understand before diving in. This article will clear up the confusion, explain the reality of Storm 4 on the PS3, explore legitimate alternatives, and help you navigate the world of PS3 game files safely.

While Storm 4 may not be available on the PS3, the console is home to some of the most beloved entries in the series. Instead of searching for a non-existent file, you should focus on enjoying the fantastic titles that were actually released for the system. The PS3 is a treasure trove for Naruto fans, featuring the first three mainline games:

To run any custom .pkg file on a PlayStation 3, the console cannot be running standard, official Sony firmware. It requires custom system modifications:

I can point you toward the correct, safe modding communities for your specific setup. Share public link

Let’s get straight to the point. The game was never officially developed, published, or released for the PS3. Official records from Wikipedia confirm that the game was released exclusively for PlayStation 4, Xbox One, and Microsoft Windows . Similarly, the expansion, Road to Boruto , was also released only for PlayStation 4, Xbox One, Nintendo Switch, and PC .