Resetter Printer Canon G2010 Better

Press the on the printer once to turn it off. (It might take a few moments to cycle down completely).

Extract the downloaded ZIP file and run the tool as an Administrator ( ST5103.exe ). Look at the tab of the software window. Find the Clear Ink Counter section. Next to Absorber , ensure it is set to Main . Click the Set button right next to it.

Use a screwdriver to carefully remove the maintenance cartridge/access panel at the back or bottom of the printer (location varies depending on regional sub-models). Carefully remove the felt-like pads. resetter printer canon g2010

Press the button once. The printer will print out a small page containing service data (it may just say D=000.0). Turn the printer off by pressing the Power button.

Close the program and try a different version of the tool, such as V5310 or V4904. Printer Freezes or Locks Permanently (Error 009) Press the on the printer once to turn it off

Resetting the digital counter tricks the printer into thinking it is brand new. However, the software clean the physical ink inside the machine.

While still holding the Power button, press the sequentially. After the 5th press, release both buttons simultaneously. Look at the tab of the software window

While keeping the Power button held down, the Stop/Reset button.

If successful, the printer will feed a blank sheet of paper and print a brief line of code indicating the counter is reset (usually reading D=000.0 ). A small pop-up window saying "A function was finished" or "Operation Completed" will appear on your computer screen. Click .

This official-style software allows for precise counter management. After putting the printer into Service Mode, you can select "Main" under the Ink Absorber Counter section and click "Set".

: Tools like WIC Reset Utility can reset the internal counter.