Blog
Aug 23

Sc673-10 Ricoh Error Work

Are you comfortable to check internal cable connections? Share public link

| Component | Meaning | |-----------|---------| | | Panel communication subsystem | | 3 | Sub-error: Protocol or handshake mismatch (not physical disconnection) | | -10 | Specific fault: "Panel boot timeout / Identification error" |

This is the most likely fix. Download the latest system firmware for your exact model from Ricom’s support site and update via SD card or remote tool. sc673-10 ricoh error

This problem occurs on Ricoh devices equipped with a . It stops the machine from working properly because the screen cannot exchange data with the internal computer system. 🔍 What Does SC673-10 Mean?

SC673-10 is a "Controller to Operation Panel" communication error specific to certain Ricoh models (often the MP 2555/3055/3555/4055/5055/6055 series or similar). The "-10" sub-code typically indicates a data reception error or a timeout in the serial communication between the main controller board (CTL) and the operation panel. Are you comfortable to check internal cable connections

: The main board may have failed to initialize communication.

Sometimes the "Flair communication" signal simply times out. A full power cycle can often re-establish the link: Power down the device using the main switch. This problem occurs on Ricoh devices equipped with a

: The main controller board sends out a signal but does not get an answer back from the smart operation panel.

:If you have technician access, check SP5-748-201 (OpePanel Setting: Connection to Cheetah/Smart Panel).

It is important to note that this SC code will only appear on Ricoh machines equipped with a Smart Operation Panel. You will not see this error on models with older, standard keypad-style panels. This error affects a wide range of Ricoh models, including:

is a "Communication Error (Controller to Operation Panel)" with subtype 10 . Unlike general communication errors (e.g., SC672), this one specifically indicates that the Controller board (CTL) successfully established physical link with the Operation Panel but failed to receive the correct startup handshake or identification packet from the panel's internal computer. In plain English: The printer's main brain can see the screen's brain, but the screen's brain isn't talking the right language or is crashing during boot.

Leave a reply

Your email address will not be published. Required fields are marked *