Ts1162 Installation Manual Exclusive [TRUSTED]

Insert the Ground wire (Green/Yellow) into the dedicated ground terminal and tighten the terminal screw.

The is a 3-LED Remote Arming Station (RAS) designed for the Challenger security system. It is frequently used in demanding environments due to its robust construction and IP67 rating , making it suitable for dusty or wet locations. 🛠️ Core Installation Steps

Fasten the assembly utilizing the four pre-molded mounting corner points. Hand-tighten the fasteners until the back rubber gasket compresses flush against the surface wall. Do not over-torque using mechanical impact drivers. Wiring Topology & Terminal Assignments Go to product viewer dialog for this item. ts1162 installation manual exclusive

Open a web browser on a machine within the same subnet and enter the factory default IP address ( 192.168.1.100 ).

Align the TS1162 drive cradle with the targeted library bay guide pins. Insert the Ground wire (Green/Yellow) into the dedicated

Whether you are configuring access control for a loading dock or securing a high-traffic entrance, proper deployment ensures long-term operational resilience. This comprehensive, exclusive installation guide covers the exact hardware mounting, RS-485 network wiring, DIP switch configuration, and system commissioning required for the Tecom TS1162. Technical Specifications Overview

Verify the shipment contains the TS1162 drive unit, mounting brackets, interface caps, and the physical alignment checklist. Wiring Topology & Terminal Assignments Go to product

links directly to the Challenger multi-drop RS-485 Local Area Network (LAN). For optimal signal performance, use high-grade 2-pair data cables or Cat5e/Cat6 data wiring.

Before unboxing, ensure your workspace is ready. Skipping this step is the leading cause of installation delays.