Usb Device Id Vid 1e3d Pid 198a Jun 2026

Go to the tab, and select Hardware Ids in the dropdown menu. Troubleshooting VID 1e3d PID 198a Drivers

Confirm it is a ChipsBank CBM2199E or similar CBM-series controller using FlashBoot.ru or similar flash information tools.

The USB device with and PID 198a is a generic Flash Disk powered by a Chipsbank Microelectronics controller . These components are frequently found in unbranded or "OEM" USB flash drives, as well as some budget-branded products like those from Lenovo . Quick Verdict Usb Device Id Vid 1e3d Pid 198a

| | Symptom | Likely Cause | Solutions | | :--- | :--- | :--- | :--- | | Driver Not Found / Unknown Device | Device Manager shows a yellow exclamation mark. | Standard Windows driver conflict or missing driver. | 1. Right-click start button and select "Device Manager". 2. Find unknown device, right-click, and select "Update driver". 3. Select "Search automatically for drivers". If that fails, click "Browse my computer for drivers" and navigate to C:\Windows\System32\DriverStore\FileRepository . | | Detected but 0 Bytes | Drive appears in File Explorer with a drive letter but shows 0 bytes used/free. | Firmware or partition corruption, often from improper ejection. | Chance of Data Recovery : Low, but possible with DMDE. Main Solution (Low-Level Repair) : Use CBM UMPTool or APTool . Follow the "Using UMPTool & APTool: The Fix" section. | | Fake Capacity | OS reports 64GB, but fails to write data beyond ~4GB. | This is a fake "capacity-expanded" drive. | 1. Test with H2testw : Write and verify full capacity. 2. Fix with UMPTool : After identifying true capacity, use UMPTool to re-flash firmware with correct parameters. | | Linux/macOS Detection | Not mounted or found in lsblk , but visible in lsusb / dmesg . | Often a driver or power management conflict. | 1. Check sudo dmesg -w when plugging in. 2. Try different USB port (preferably USB 2.0). 3. Install/update usbutils package. | | Bootable USB Failure | Cannot boot or write image with Rufus/BalenaEtcher. | BIOS boot sector corruption or configuration error. | 1. Use Rufus : With drive inserted, run Rufus, select drive, and click "START". 2. Low-level repair : If Rufus fails, use UMPTool. Erase the entire device, re-flash, then recreate bootable media. |

Note: Some vendors have abandoned driver updates for these sensors. If you cannot get it to work on Windows 11, consider a from a mainstream brand like Kensington or Elan. Go to the tab, and select Hardware Ids in the dropdown menu

The hardware identification string identifies a Flash Disk mass storage device powered by a Chipsbank Microelectronics controller . Operating systems read these specific numerical identifiers to map hardware devices to their appropriate software drivers.

These are the official factory software suites used to flash firmware and map bad sectors on Chipsbank chips. You must match the version of APTool/UMPTool to the exact controller model identified by ChipGenius. Resources for these files can be reliably searched on specialized databases like USBDev or FlashBoot . These components are frequently found in unbranded or

Below is a technical reference sheet and troubleshooting guide generated for this specific hardware profile. 🏷️ Device Identification